ACTi TCM-5311 Manuale Utente Scaricare il pdf (Pagina 12)

www.acti.com

TCM-5311 Hardware User’s Manual

Basic Connections

Follow the procedures below to connect the IP device to the respective apparatuses.

If you have a PoE(Power over Ethernet) supported switch or injector:

1) Connect your IP Box Camera to the Switch / Injector by CAT5 or CAT6 cables with RJ45

connector.

2) Connect your Switch / Injector to PC with another CAT5 / CAT6 network cable.

If your switch does not support PoE, and you are powering the camera with power

adaptor:

1) Connect the power adaptor to IP Box Camera

2) Connect IP device’s Ethernet port to Network switch (via RJ45 connectors).

Connect a PC to the Ethernet switch (via RJ45 connectors)

Please refer to our PoE Guide for more details on Power over Ethernet related concepts.

Back Focus adjustments

For proper calibration for optimal performance, please go to our website and see our guide on

how to adjust camera back focus.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18

Nessun commento

ACTi TCM-5311 Manuale Utente Pagina 12